Quick-programming
The most commonly used microwave time-settings can be called up simply by pressing the rotary control
function, the microwave power setting is always 100 %. Each press on the rotary control adds 30 seconds to the cooking
time. The maximum pre-programmable time is 10 minutes.
Note: the cooking process starts as soon as the rotary control is pressed.
Example: to programme the microwave function for a cooking time of 2 minutes at 100 % power.
Press the rotary control
Grill rack
The food to be cooked is put directly on the grill rack, which is then placed on the glass turntable.
∙ For grilling, use the grill rack with the extended feet.
∙ When using the hot-air convection function, use the rack with the shorter feet.
Grill function
:
The grilling process uses radiation heat to cook the food. The programme is suitable for cooking 'au gratin' or for grilling thin
pieces of meat.
The programme is selected by pressing
Example: to programme the unit for a grilling time of 30 minutes.
1.
Press
once. The display shows 'Grl'.
2.
Turn the rotary control
3.
Press the rotary control
As the meat needs to be turned after one side is sufficiently browned, and taken out once it is done on both sides, this
process should be closely monitored.
Grill/microwave combination programmes
For this grill/microwave combination, two programme settings are available.
The cooking time can be pre-set to a maximum of 95 minutes.
Setting 1:
The microwave function is active for 30 % of the pre-programmed time, the grill function for 70 %.
This programme is suitable for cooking fish or cooking 'au gratin'.
Example: to programme the unit for a cooking time of 30 minutes at setting 1
1.
Press
twice.
The display shows 'Co-1'.
2.
Turn the rotary control
3.
Press the rotary control
Setting 2:
The microwave function is active for 55% of the pre-programmed time, the grill function for 45%.
This programme is suitable for cooking potatoes or poultry.
Example: to programme the unit for a cooking time of 12 minutes at setting 2
1.
Press
three times.
The display shows 'Co-2'.
2.
Turn the rotary control
3.
Press the rotary control
Hot-air function
:
With this function, hot air circulates inside the oven, achieving an even cooking and browning process. The pre-
programmable temperature range for this unit is between 110°C and 200°C. The temperature is set by repeatedly pressing
the
-key. The cooking time can be pre-set to a maximum of 95 minutes.
If required, the appliance may also be pre-heated. Select the desired temperature and press the rotary control
24
:
4 times. The display shows 2:00 and the microwave operation starts.
. The maximum programmable cooking time is 95 minutes.
until the display shows 30:00.
to start the cooking process.
:
until the display shows 30:00.
to start the cooking process.
until the display shows 12:00.
to start the cooking process.
. With this
.