Publicidad
Idiomas disponibles
Idiomas disponibles
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise
yourself with your product and to use it for its intended
purpose.
The operating manual includes important instructions
for the safe, proper and economic operation of the
product, for avoiding danger, for minimising repair costs
and downtimes and for increasing the reliability and ex-
tending the service life of the product.
In addition to the safety instructions in this operating
manual, you must also observe the regulations applica-
ble to the operation of the product in your country.
Keep the operating manual package with the power tool
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and carefully
observed by all operating personnel before starting the
work.
The product may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such products must also be observed.
We accept no liability for accidents or damage that oc-
cur due to a failure to observe this manual and the
safety instructions.
2
Product description (fig. 1)
1.
Chuck opening
2.
Quick-release chuck
3.
Torque adjusting ring
3a.
Mode selection adjusting ring
22 | GB
4.
Gear selector switch
5.
Battery
6.
Battery mount
7.
Release button (battery)
8.
LED work lamp
9.
On/off switch
10.
Rotational direction switch
11.
Belt clip
12.
Screw
13.
Battery charger
14.
LED (charger)
15.
Wall bracket
16.
Bits
17.
Bit holder
18.
Metal drill
19.
Wood drill
20.
Sockets
21.
Measuring tape (5m)
22.
Countersink
23.
Center punch
24.
Cutter knife
25.
Mine
26.
Carpenter's pencil
27.
Button for battery charge status indicator
28.
Charge status indicator
3
Scope of delivery (Fig. 1)
Item Quanti-
ty
5.
2 x
11.
1 x
12.
1 x
13.
1 x
16.
40 x
17.
1 x
18.
14 x
19.
5 x
20.
8 x
21.
1 x
22.
1 x
23.
1 x
24.
1 x
25.
1 x
26.
1 x
1 x
1 x
4
Proper use
The product is intended for screwing in and unscrewing
screws, as well as for drilling into wood, metal and plas-
tic and for hammer-drilling into masonry.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
www.scheppach.com
Designation
Battery 20V 2Ah (item no. 7909201714)
Belt clip
Screw
Battery charger 20V 2.4 A
(item no. 7909201716)
Bits
Bit holder
Metal drill
Wood drill
Sockets
Measuring tape (5m)
Countersink
Center punch
Cutter knife
Mine
Carpenter's pencil
Cordless impact drill
Operating manual
Publicidad
