Cembre B-TC500Y Manual De Uso Y Mantenimiento página 5

1. GENERAL CHARACTERISTICS
Application range
Max. cutting diameter
Operating pressure
Dimensions (Fig. 6 page 30)
Weight with battery
Motor
Operating temperature
Recommended oil
Operating speed
Safety
Rechargeable battery
Type
Weight
Battery charger
Input
Acoustic noise
(1)
L
pA
L
pCPeak
L
WA
Vibration
(2)
Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u
(1)
L = weighted continuous acoustic pressure level equivalent.
pA
L = maximum value of the weighted acoustic displacement pressure at the work place.
pCPeak
L = acoustic power level emitted by the machine.
WA
The vibration emission during actual use of the tool can differ from the declared total value depending on the
(2)
ways in which the tool is used and of the need to identify safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions of use. Estimation of exposure is performed taking account
of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time.
5
B-TC500Y
mm (inches)
bar (psi)
mm (inches)
kg (lbs)
V DC
°C (°F)
twin speed operation and automatic switching from a rapid
advancing speed of the ram to a slower, more powerful speed
V / Ah / Wh
kg (lbs)
ASC55-
type
EU
V / Hz
W
dB (A)
dB (C)
dB (A)
m/s
2
B-TC500YE B-TC500YT B-TC500YA
suitable for cutting Copper, Aluminium,
and ACSR conductors
50 (2")
700 (10,000)
405 x 398 x 83 (15.9 x 15.6 x 3.3)
5,8 (12.7)
18
-15 to +50 (+5 to +122)
ENI ARNICA ISO 32 or equivalents
maximum pressure valve
18 / 5,2 / 93,6
CB1852L (Li-Ion)
0,66 (1.45)
ASC55-
UK
220 - 240 / 50 - 60
85
73
94.5
79
0.575 max.
ASC55- ASC55-
AUS/NZ USA/CA
115 / 60