Publicidad
Idiomas disponibles
Idiomas disponibles
NON=DUCTED RECIRCULATiON
FILTERS iNSTALLATiON
1. Non-ducted
recirculation
(B03300487) is included.
2. Position the filters over the blower.
3. Rotate to lock filters in place.
filters
MAINTENANCE
NON-DUCTED
RECIRCULATION
FILTERS
fig.12
Proper maintenance
of the Range Hood will
assure proper performance of the unit.
Grease Filter
The grease filter should be cleaned frequently.
Use a warm detergent solution. Grease filter
is dishwasher
safe.
Remove filter by pushing filter towards the back
of hood and rotating filter downward.
/
GREASE FILTER
fig.13
Non=ducted recirculation
filters
The non-ducted
recirculation filters should be changed every 6 months. Rotate the filters to
remove and replace.
Hood Cleaning
Stainless steel is one of the easiest materials to keep clean. Occasional care will help preserve
its fine appearance.
Cleaning tips:
"
Hot water with soap or detergent is all that is usually needed.
"
Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to avoid water
marks.
"
For discolorations
or deposits that persist, use a non-scratching
household
cleanser or
stainless steel polishing powder with a little water and a soft cloth.
"
For stubborn cases, use a plastic scouring pad or soft bristle brush together with cleanser
and water. Rub lightly in direction of polishing lines or "grain" of the stainless finish. Avoid
using too much pressure which may mar the surface.
"
DO NOT allow deposits to remain for long periods of time.
"
DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the
surface causing rust.
"
DO NOT allow salt solutions, disinfectants,
bleaches, or cleaning compounds to remain in
contact with stainless steel for extended periods. Many of these compounds contain chemi-
cals which may be harmful. Rinse with water after exposure and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
Publicidad
