Descargar Imprimir esta página

Edenwood MIDISOUND Instrucciones De Uso página 27

Publicidad

Idiomas disponibles

Idiomas disponibles

B
Product usage
BT/USB
BT/USB
BASS
All modes
EQ
All modes
PARTY CHAIN
All modes
5.
If the speaker is not used for 15 minutes, it will automatically enter standby mode. Press
the
button to turn it back on.
Radio
Extend the FM antenna (on the back of the speaker).
Repeatedly press the SOURCE button to select TUN (radio mode). The frequency will be
displayed on the screen: 90.3, for example.
Press and hold the
will be displayed on the screen: e.g. P-01.
Press the
button again at any time to stop the automatic scan.
When a channel (e.g. P-01) is displayed on the screen, press
or previous station.
When the automatic scan has stopped and the radio frequency (e.g. 90.3) is displayed,
press
or
to fine tune the radio channel (in 0.05 MHz increments).
NOTE:
Up to 30 radio stations can be saved. The actual number of registered stations
depends on the reception in your area. Once saved, the stations will be retained,
even if you turn off the speaker.
The station memory will be erased whenever the speaker's power cable is
unplugged.
Microphone
You can connect 1 microphone (not supplied) to sing karaoke or create a speaker system with
which you can communicate with a large audience.
Connect the cable (not supplied).
Turn the MIC VOL knob to adjust the microphone volume.
If an echo can be heard whilst using the microphone, adjust the ECHO VOL knob until the
echo is gone or very faint.
When you have finished using the microphone, unplug the cable from the speaker.
Press this button to skip to the previous track or file.
Press to skip to the next track or file.
Press this button to turn the bass on or off. BASS ON
is displayed when the bass is on and BASS OFF is
displayed when the bass is off.
Press repeatedly to select a sound: ROCK, JAZZ,
SAMBA, POP, BALANCE or FUNK.
Press repeatedly to select PARTY CHAIN ON or PARTY
CHAIN OFF.
NOTE: The Party Chain function only works when an
additional speaker is connected to the speaker system
(see the Connecting the speaker to an additional
speaker section).
button to start an automatic scan. The number of the saved station
25
or
EN
to skip to the next

Publicidad

loading

Este manual también es adecuado para:

972659