EBERTH OE1-12V50LBS Instrucciones De Uso página 41

1. Push the shear pin through the small hole.
2. Push the propeller (G),p.13 onto the axle so
that the shear pin engages in the receptacle
and there is no longer any distance between
the propeller hub and the motor housing (E).
3. Attach the propeller to the axle.
Slide the disc over the axle.
Fix the axle with the crank.
Proceed in reverse order to dismantle the propeller.
16
Shear pin
fig. 6
fig. 7
fig. 8
V. 1.0 EN