Beko BEVPG 090 Manual De Instrucciones página 19

2 Unit specifications and features
Note on louver angles:
When using COOL or DRY mode,
do not set louver at too vertical an
angle for long periods of time. This
can cause water to condense on
C
the louver blade, which will drop
on your floor or furnishings.
When using COOL or HEAT mode,
setting the louver at too vertical an
angle can reduce the performance
of the unit due to restricted air
flow.
2.5.2 Setting horizontal angle of
air flow
The horizontal angle of the airflow must be set
manually. Grip the deflector rod (See Fig.B) and
manually adjust it to your preferred direction. For
some units, the horizontal angle of the airflow
can be set by remote control. please refer to the
Remote Control Manual.
Warning:
Do not put your fingers in or
A
near the blower and suction
side of the unit. The high-
speed fan inside the unit may
cause injury.
Split type air conditioner / User Manual Split type air conditioner / User Manual
Deflector
rod
Fig. B
19
19 / 324 EN / 334