Beko BEVPG 090 Manual De Instrucciones página 20

2 Unit specifications and features
2.6 Manual operation
(without remote)
Warning:
The manual button is
intended for testing
purposes and emergency
operation only. Please do not
use this function unless the
A
remote control is lost and it
is absolutely necessary. To
restore regular operation,
use the remote control to
activate the unit. Unit must
be turned off before manual
operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the Manual control button on the right-
hand side of the unit.
3. Press the Manual control button one time to
activate FORCED AUTO mode.
4. Press the Manual control button again to
activate FORCED COOLING mode.
5. Press the Manual control button a third time to
turn the unit off.
6. Close the front panel.
20 20 / 324 EN / 334
Manual control button
2.7 Install the HomeWhiz kit
(wireless module)
1. Remove the protective cap of the HomeWhiz kit
(wireless module)
2. Open the front panel and insert the HomeWhiz
kit (wireless module) into the reserved interface.
Insert
Warning:
This interface is only
A
compatible with
HomeWhiz kit (wireless
module) provided by the
manufacturer.
Split type air conditioner / User Manual Split type air conditioner / User Manual