Publicidad
Idiomas disponibles
Idiomas disponibles
3 PREPARATION FOR USE
3.1 PRELIMINARY CHECKS
This instrument has been checked mechanically and electrically before shipment. All
precautions have been taken to assure that the instrument reaches you under perfect
conditions. However, it is advisable to carry out a rapid check to detect any possible
damage, which might have occurred during transport. Check the accessories contained in
the packaging to make sure they are the same as reported in § 11.
3.2 POWER SUPPLY
The instrument is powered by 2x1.5V type AA LR06 alkaline batteries. For battery
replacement please follow procedure described at § 9.2.
• After replacing batteries the instrument remains ON also if STATUS and
ALARM LED are OFF. Pressing START/STOP key you activate or disable
recordings only.
• During a recording the blinking ALARM LED every 3 seconds means a low
battery status.
3.3 STORAGE
To guarantee the accuracy of measurements, after a period of storage under extreme
environmental conditions wait until the instrument stabilizes within the listed operating
conditions (see § 10.3).
CAUTION
EN - 5
XL423 - XL424
Publicidad
