Publicidad
Idiomas disponibles
Idiomas disponibles
11 SERVICE
11.1 WARRANTY CONDITIONS
This equipment is guaranteed against any material fault or manufacturer's defect, in
accordance with the general conditions of sale. During the warranty period (one year),
faulty parts may be replaced, while the manufacturer reserves the right to decide either to
repair or replace the product. In the event of returning the equipment to the after-sales
service or to a regional branch, the transport charges are up to the customer. The
returning must be agreed in advance with the supplier or local distributor. A report
indicating the reasons for returning and defects detected must be joined to the instrument.
The manufacturer will not be responsible for any damage against persons or things.
The warranty cannot be applied under the following circumstances:
• Accessories and batteries (not covered by warranty).
• Improper use of the equipment or combination of the instrument with incompatible
equipment.
• Damages caused by incorrect shipping procedures.
• Damages caused by repair/service trials of unauthorized people.
• Modifications to the equipment without explicit authorization of our Technical Dept.
• Adaptation to a particular application not provided for by the definition of the equipment
or by the instruction manual.
The contents of this manual may not be reproduced in any form whatsoever without prior
agreement.
Our products are patented. The logotypes are registered. We reserve the right to
modify characteristics and prices as part of technological developments which
might be required.
11.2 AFTER-SALE SERVICE
If the equipment doesn't work properly please check the battery condition and replace
them if necessary before contacting our Service Dept. If the problem persists check if your
operating procedure complies with the one described in this manual.
In the event of returning the equipment to the after-sales service or to a regional branch,
the shipping charges are up to the customer. The returning must be agreed in advance
with the supplier or local distributor. A report indicating the reasons for returning and
defects detected must be joined to the instrument. The manufacturer will not be
responsible for any damage against persons or things.
EN - 17
XL423 - XL424
Publicidad
