HT Instruments XL423 Manual De Instrucciones página 36

10 TECHNICAL SPECIFICATIONS
10.1 TECHNICAL CHARACTERISTICS
Accuracy is calculated as ± [%rdg + (dgt*resolution)] referred to 23°C ± 5°C, <60%RH.
AC TRMS VOLTAGE MEASUREMENT
Range
0  600V
Note: The instrument will null readings lower than 2V
➢
Crest Factor max:
➢
Frequency (Hz):
➢
Conversion mode:
➢
Bandwidth:
➢
Sampling frequency:
➢
Memory size:
➢
Sampling period:
➢
Serial port:
Reference guidelines
Safety:
EMC:
Insulation:
Pollution degree:
Measurement category:
10.2 GENERAL CHARACTERISTICS
Mechanical characteristics
Dimensions (L x W xH):
Test leads length:
Weight (including batteries):
Protection index:
Power supply
Battery type:
Battery life:
10.3 ENVIRONMENTAL CONDITIONS
Reference temperature:
Operating temperature:
Operating humidity:
Storage temperature:
Storage humidity:
Max height of use:
This instrument complies with the requirements of Low Voltage Directive
2014/35/EU (LVD) and of EMC Directive 2014/30/EU
This instrument complies with the requirements of 2011/65/EU (RoHS) directive and
Resolution
0.1V
2
506%, 606%
TRMS
3200Hz
64 samples each 20ms
1Mbyte
1s, 6s, 30s, 1min, 5min
RS232
IEC/EN61010-1
IEC/EN61326-1
double insulation
2
CAT III 600V~ between inputs and to ground
120 x 80 x43mm (5 x 3 x 2in)
approx 2.6m (7.5ft)
approx 0.5kg (1lv)
IP65 (RS232 connector Closed)
2x1.5V alkaline type AA LR06
> 6 months (with charged batteries)
23°C ± 5°C (73°F ± 41°F)
-20°C  60°C (-4°F  140°F)
100%RH (RS232 connector closed)
-20°C ÷ 60°C (-4°F  140°F)
100%RH
2000m (6562ft)
2012/19/EU (WEEE) directive
EN - 15
XL423 - XL424
Accuracy
(1%rdg +2dgt)