Publicidad
PASO 15
Selecting a Printer firmware file
Abre el paquete de firmware que has descargado anteriormente. Abre una de las
carpetas en función del modelo de impresora que tengas (selecciona "MK3S" para
el modelo de la MK3S+)
There are two firmware files in the folder. One for the printer, the other one for the
MMU unit.
As a firmware file for the MK3S+, select the MK3S+ .hex file
On MK3S+ printer, MMU3 requires printer firmware 3.13 or newer!
If you are updating from a printer firmware 3.11 or older, the printer will require
you to do a
PASO 16
Flasheo Firmware MK3S+ (parte 1)
168
10B. Configuración y Calibración MK3S+
thermal model calibration
Ensamblaje Original Prusa MMU3
first.
Connect the printer to the
electricity and turn it on.
Now, let's flash the printer's
firmware.
To flash the MK3S+, use the
bundled USB Type B cable to
connect the computer to the top of
the black electronics box on the
printer.
Then, continue to the next step.
Publicidad
