Publicidad
Idiomas disponibles
Idiomas disponibles
: pulling the lever towards the operator en-
gages reverse gear, pushing the lever forwards engages for-
ward gear, to change speed press the "+" and "-" buttons.
chassis so it can be rotated backwards.
: raises and lowers the head on
models without actuator.
squeegee, enabling or disabling the suction motor on the ver-
sion with electric drive.
unscrew the two knobs to adjust the height of the instrument
panel.
1
: when pressed accesses the ma-
chine operating program submenus, in the
entered.
: increases the value in the ma-
chine operating program submenus, in the
menu" selects the next parameter or increases the val-
ue of the selected parameter.
Working
Some useful tips to get the most from your
scrubber drier
can be performed in two separate operations.
Prewashing with brushes or pads:
22
: releases the tank from the
raises and lowers the
:
Drying:
Emptying the collection tank
If the tank is full, the display shows the corresponding alarm, see the
chapter "Display alarms"; after a few seconds, the suction motor shuts
4
down, then stop the machine and empty the tank following the instruc-
3
tions shown below. To resume work, turn the operation selector to the
OFF position (reset errors):
2
10
"Technical
menu"
"Technical
EN
: decreases the value in the ma-
chine operating program submenus, in the
menu" selects the previous parameter or decreases the
value of the selected parameter.
Insert the electronic key.
Using the operation selector, select the scrubbing program.
Activate the drive lever, lower the squeegee and start working.
Select the Brush operating program.
Activate the drive lever, start working.
speed; the slower the machine travels, the less detergent must
be delivered.
Persist when washing particularly dirty points to give the deter-
gent time to perform its chemical action detaching and suspend-
action.
Select the Suction operating program, lower the squeegee.
Activate the drive lever, start working.
Pass over the same area washed previously. The result is equiv-
alent to in-depth washing and subsequent ordinary maintenance
will take less time.
Take the machine to the disposal area.
Unhook the hose from the clip.
the tank with clean water.
"Technical
12
1
18
Publicidad
