Identification Of The Encapsuled - WEG AVR-A-OPT-07 Manual De Instalación, Operación Y Mantenimiento

www.weg.net
13.

IDENTIFICATION OF THE ENCAPSULED

Subtitle:
Vad= Voltage Adjustment.
Stb= Stability adjustment.
U/F= Setting the beginning of the operating range of the U/F protection.
Drp= Droop adjustment.
Hz= under frequency protection actuated.
Oex= indication of an overvoltage.
OK= on static exciter.
= External Potentiometer 5KΩ, when there is no potentiometer or +/- 9V (07E), make jumper between the pins.
1= Power supply voltage (See configuration of the model as per item 15).
2= Power supply voltage (See configuration of the model as per item 15).
3= Power supply voltage (See configuration of the model as per item 15).
4= Power supply voltage (See configuration of the model as per item 15).
F+= Excitation Field
F-= Excitation Field
S1= TC In/5A
S2= TC In/5A
R= Voltage Feedback
S= Voltage Feedback
T= Voltage Feedback
Automatic Voltage Regulator – AVR-A-OPT-07 / AVR-A-OPT-07E / AVR-A-OPT-07/T l 15