Safety Rules; General - Promax GF-941 Manual De Instrucciones

USER'S MANUAL GF-941

2. SAFETY RULES

2.1 General

•
Use this equipment in systems or devices with the negative measuring connected to
ground potential or insulated from the mains.
•
This is a Class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
•
This equipment can be used in Overvoltage Category II installations and Pollution
Degree 1 environments.
•
When using some of the following accessories use only the specified ones to ensure
safety.
Power cord
•
Observe all specified ratings both of supply and measurement.
•
Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
•
Use this instrument under the specified environmental conditions.
•
The user is only authorised to carry out the following maintenance operations:
Mains fuse replacement, that should fit indicated type and value.
On the Maintenance section proper instructions are given.
Any other change on the equipment should be carried out by qualified
personnel.
•
The negative of measurement is at ground potential.
•
Do not obstruct the ventilation system of the instrument.
•
Follow the cleaning conditions described in the Maintenance paragraph.
04/2003
CA-005
Page 5