Publicidad
Idiomas disponibles
Idiomas disponibles
Cable locator
7. UAC key to switch between cable locator mode and mains voltage.
8. Manual key to switch between manual or automatic cable locator.
9. Key to adjust the sensitivity down in manual mode.
10. Key to adjust the sensitivity upwards in manual mode.
11. Speaker.
1.3.4 Receiver display
1. Symbol to indicate the voltage / power of the receiver battery.
2. Symbol to indicate the voltage / energy of the emitter battery.
3. Transmit power level (level I, II or III).
4. Manual mode symbol.
5. Automatic mode symbol.
6. In automatic mode, this number indicates the signal strength, in manual
mode it shows SEL to indicate no signal or shows a number that indicates
signal strength, in UAC mode, UAC is displayed .
7. Concentric circles indicate preset sensitivity in graphics. More circles
indicate higher sensitivity, fewer circles indicate lower sensitivity.
8. Code received
9. Intensity of the signals.
10. Symbol indicating the voltage in the network.
11. Symbol indicating the mute mode.
13
Publicidad
