Publicidad
Idiomas disponibles
Idiomas disponibles
4.3 Backlight function
Press the backlight button 5 on the receiver to turn on the backlight, and
press it again to turn it off. The emitter has no backlight function.
4.4 Mute function
Press the mute button 8 on the transmitter to turn off the sound, this way it
will no longer emit any sound when pressing any button; press the mute
button again to turn off the transmitter's mute function, and the buzzer
function will return. Press the transmitter's backlight / mute button 5 for 1
second to turn off the sound, and the receiver's buzzer or speaker will not
make any sound; press and hold the backlight / mute button 5 on the receiver
for 1 second to deactivate the mute function, and the ringer and speaker
functions will be active again.
4.5 Auto power off function
The emitter does not have an automatic shutdown function. If any button on
the receiver is not pressed for a long period of time, the receiver will
automatically turn off after 10 minutes. Please press the on / off button 2 to
turn on the transmitter.
5 TECHNICAL PARAMETERS
5.1 Technical parameters of the issuer
1. Output signal -125 kHz
2. External voltage identification scale DC 12-400V + -2.5%; AC 12-400V
(50-60Hz) + x2.5%
3. LCD screen with display function and bar graph.
4. Dielectric strength against external voltage-400V AC / DC Max.
5. Overvoltage category: CAT III 300V
6. Pollution degree- 2
7. 1x 9V power supply, IEC 6lR61
8. Minimum power current-Around 31mA
9. Maximum power current-About 115mA
10. Fuse-F 0.5A 500B, 6.3x32mm
Temperature scale
38
Cable locator
Publicidad
