Publicidad
Idiomas disponibles
Idiomas disponibles
Cable locator
1.2 Features of the cable locator
• Detection of cables, power lines, water / gas supply pipes buried in the wall
or ground.
• Detection of interruptions and short-circuits in cables and electric lines buried
in the wall or the ground;
• Detection of fuses and assignment of current circuits;
• Trace of distribution sockets and plugs that have been accidentally covered
by plastering;
• Detection of interruptions and short circuits in underfloor heating;
• The emitter has a built-in AC / DC voltmeter function, which can measure 12
to 400 V AC / DC voltage on a linear basis:
• AC: 12 to 400V (50 to 60 Hz) ± 2.5%
• DC: 12 to 400V ± 2.5%
• The emitter display can show a preset transmit power, transmitted codes, its
own battery power, the detected mains voltage, the status of the detected
AC / DC voltage from the mains and the symbol warning for mains voltage.
• The emitter has the self-inspection function to detect its own working status
and display it on the LCD screen for user reference.
• The receiver's display can show the transmitter's transmit power, transmitted
codes, energy from its own batteries and those of the AC transmitter induced
in the detected signal, and a warning symbol for mains voltage.
• The receiver sensitivity can be adjusted manually or automatically.
• The receiver can perform frequency sweep automatically.
• Both transmitter and receiver can work in mute mode.
• The receiver is available in automatic power-off mode (it turns off
automatically after 10 minutes of pressing any button)
• The receiver's LCD screen is provided with a backlight for application in low
light.
• Both emitter and receiver are provided with flash light function to work in the
dark.
• Additional emitters are available to amplify or distinguish various signals.
• Compact, resistant and portable.
9
Publicidad
