Publicidad
Idiomas disponibles
Idiomas disponibles
Cable locator
Caution!
1. If there is electrical current in the cable, cut off the power first.
2. The ends of the unshielded cables must lead together, and must be twisted.
3. If only one emitter is available, take multiple measurements by changing
the connection between the emitter and the cable.
Recommendations
1. When you change the connection between the emitter and the core wire,
different circuits can be distinguished if we change the transmission encoding.
2. Adjust the transmitting power of the emitter to suit different detection radii.
3. Acquire a transmitter with different transmission signals when necessary.
35
Publicidad
