Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
English
Change the direction of the door
1. Carefully remove the top hinge cover and uns-
crew the screws securing the top hinge to the
product.
2. Carefully remove the top door and
place it in a safe place. Note that there are spa-
cers between the door and the hinge; note how
many there are and their position.
3. Remove the centre hinge by removing the
screws securing it to the product; hold the bot-
tom door while doing so.
4. Remove the lower door and place it in a safe
place, taking into account the position of the se-
parating parts.
5. Swap the upper front hinge with the opposite
side on its underside.
6. Replace the bottom door using the spacers
and place the centre hinge on the door. After
removing the 3 covers, attach the hinge firmly to
the product.
7. Swap the front bottom hinge with the opposite
side at the top. Replace the upper door and the
"new" hinge.
Replace the top door and the "new" top hinge
and attach them firmly to the product.
8. Put the centre covers and top hinge cover parts
in place to complete the process.
9. Unscrew the four door sliding brackets and
swap them to the far side of the new hinge posi-
tions, before fitting the decorative door.
51
infiniton.es
Publicidad
