Harman AKG DPT800 Modo De Empleo página 69

eQuiPment descriPtion
Description
MUTE switch
DMS800 MANUAL
5 Equipment description
5.1 General description
The DMS800 consists of the following parts:
• DSR800 digital stationary true diversity transmitter
• DHT800 handheld transmitter and/or DPT800 bodypack transmitter
There is the choice of AKG microphone heads with the handheld transmitter:
• D5 WL1
• D7 WL1
• C5 WL1
Both the receiver and the transmitter operate in a switching bandwidth of up to
112 MHz. The country-specific frequency bands work within a UHF band from 550
to 832 MHz.
This means you can select the receiver frequency from the preprogrammed
frequency groups and channels (presets) of your receiver or set them directly in
25 kHz increments.
Both the handheld and the bodypack transmitters are programmed to the
parameters set on the receiver via infrared transmission.
5.2 Functions of the external MUTE switch (optional)
The optional, external MUTE switch RMS4000 allows the bodypack trans‑
mitter to be switched to mute even if the transmitter is fitted in a way that
makes the integrated MUTE switch hard to access.
5.3 Technical data
System data
Carrier frequency range
(country‑dependent)
Audio bandwidth
THD
Band 1: 550.1 – 662.9 MHz
Band 2: 730.1 – 831.9 MHz
30 Hz – 20 kHz (± 3 dB)
typ. 0.08 %
69