Harman AKG DPT800 Modo De Empleo página 83

QuicK setuP
DMS800 MANUAL
Step Description
10 Keep the transmitter's infrared sensor at a distance of ap‑
prox. 10 cm of the receiver's infrared sensor
The receiver display shows a message confirming the suc‑
cessful synchronization.
11 Return to the channel list by pressing the BACK wheel once
12 Select channel 2 by turning the SELECT wheel to the right
On the display, the question is shown as to whether or not to
assign the channel.
13 Assign channel 2 by pressing CH2
14 Repeat steps 7 to 10
83