Publicidad
Idiomas disponibles
Idiomas disponibles
2. Separate the water supply line from the refrigerator
3. Remove the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
• Is necessary, have two people disassemble the doors.
1
DA68-02981N-07.indb 25
Remove one or two water lines, depending
on the model, by pressing each coupler (1)
and pulling the water lines (2) away.
• Your refrigerator may have one or two
1
2
• Do not cut the water line.
1. With the Freezer door closed, remove
2
• Be careful not to damage the sensor
NOTE
water lines, depending on the model.
If it has two, the lines are different
colors. Make sure you match the colors
when you re-attach them.
CAUTION
Gently separate it from the coupler.
the upper hinge cover (1) using a
screwdriver, and then disconnect the
wires by gently pulling them apart (2).
NOTE
harness with the hinge cover.
English 25
2018. 7. 4.
1:17
Publicidad
