Publicidad
Idiomas disponibles
Idiomas disponibles
Leveling the refrigerator
Make sure the refrigerator is level so that you can make final adjustments.
Use a level to test if the refrigerator is level both side to side and back to front.
If the refrigerator is not level, you will not be able to get the doors perfectly even, which
may cause moisture condensation and increased energy bills.
NOTE
• The front of the refrigerator is also adjustable.
Before levelling the refrigerator, remove the front leg cover.
When the Freezer part is lower than the Fridge part.
Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the Freezer part.
DA68-02981N-07.indb 31
Leg
Screw Driver
Open both the freezer and refrigerator
doors.
Unscrew the three screws holding the front
leg cover in place by turning them counter-
clockwise.
When the screws are loose, remove the
front leg cover.
Insert a flat-blade screwdriver into a slot
on the Fridge Leg, then turn it clockwise.
NOTE
• Refer to the next section for the best
way to make very minor adjustments to
the doors.
English 31
2018. 7. 4.
1:17
Publicidad
