Publicidad
Idiomas disponibles
Idiomas disponibles
Refrigerator
Compression
Nut (1/4")
(6.35 mm)
(Assembled)
Férula
(no provista)
Compression nut (B) (1/4")
(6.35 mm) (Not supplied)
Copper tubing
(Not supplied)
Household water line
DA68-02981N-07.indb 35
Plastic Tubing
(Supplied)
Compression
Fitting
(Assembled)
Bulb
Plastic tubing
(B)
or
(Not supplied)
1. Connect the household water line to the
assembled compression fitting.
- If you are using copper tubing, slip the
compression nut (B) (not supplied) and
ferrule (not supplied) on the copper
tubing (not supplied) as shown.
- If you are using plastic tubing (B), insert
the molded end (Bulb) of the plastic
tubing (B) into the compression fitting.
CAUTION
• Do not use plastic tubing (B) without the
molded end (Bulb).
2. Tighten the compression nut (B) onto
the compression fitting.
Do not over-tighten the compression
nut (B).
3. Turn the water on and check for any
leaks inside the refrigerator, around
the water filter, and in any connection
areas. If you find water drops or leaks,
turn off the main water supply.
If the leaks are in the connection areas,
check the connections and, if necessary,
tighten. If there are leaks in the
refrigerator, check the water filter and
confirm it is in the locked position.
Turn on the water supply and check for
leaks again.
4. Plug in the refrigerator.
English 35
2018. 7. 4.
1:17
Publicidad
