Publicidad
Idiomas disponibles
Idiomas disponibles
Setting up
Making minor adjustments between doors
A level refrigerator is necessary for getting the doors perfectly even.
Make sure your refrigerator is level before you begin.
If you need help leveling, review the previous section on leveling the refrigerator.
When the door of the freezer is
Adjustment part
Wrench
Wrench
32 English
DA68-02981N-07.indb 32
higher than the fridge
Bolt
3
2
Nut
1
Bolt
3
2
The process for adjusting each door is the
same.
Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the nut (1) from the lower
hinge until it reaches the upper end of
the bolt (2).
NOTE
• When you release the nut (1), make sure
that you use the hex wrench provided
(3) to loosen the bolt (2) in a counter-
clockwise (
) direction.
You should then be able to unscrew the
nut (1) with your fingers.
2. Adjust the height difference between
the doors by turning the bolt (2)
clockwise (
) or counter clockwise
(
).
NOTE
• When you turn clockwise (
door will move up.
), the
2018. 7. 4.
1:17
Publicidad
