Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: Always make sure that new recliner inspection is completed by someone who understands
the operations manual. Improper operation of the recliner may cause product damage and void your
warranty.
New recliner setup and inspection
Complete the following steps when you receive new recliners:
1. Remove all packing material including foam wrap and bag. If desired, the bag may
be replaced after recliner inspection.
2. Attach the backrest.
NOTE: Your recliner will arrive with the backrest face down in the seat.
You may reference video located on YouTube titled https://youtu.be/JD5ksQvRGss.
3. Examine recliner surfaces for damage.
4. Make sure all recliner functions and features work. Do this immediately upon receipt
of your recliners.
A
Receiving new recliners
a. Locate two red thumb knobs in the package attached to the push
handle.
b. Lift the backflap and remove any cardboard.
c. Lift backrest and position back brackets over bayonets and slide into
place, slightly push on backrest to ensure backrest is locked in place.
d. Using your fingers, tighten two red thumb knobs through the back
bracket into the back frame.
(11)
Unity Recliner Manual GD-00010066_Rev-D - 02/24
Publicidad
