Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Do not use an electric screwdriver during installation.
WARNING
This Manufacturer advises that no lock can provide complete security by itself. This lock may
be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No
lock can substitute for caution, awareness of your environment, and common sense. Builder's
hardware is available in multiple performance grades to suit the application. In order to enhance
security and reduce risk, you should consult a qualified locksmith or other security professional.
Installation Instructions
Replace the old lock with the new one
To replace the old lock with this product on the same door, please confirm the backset for the
latch and the specifications for the face plate match. Please also refer to the following
instructions to adjust the backset and face plate to match the existing door's specifications.
Latch Backset Adjustment
Rotate the latch case to the right for a backset of 2-3/4" (70 mm).
Reverse the direction for a backset of 2-3/8" (60 mm).
The distance between the edge of the door to the center of the hole is
the latch backset. The adjustable latch provides two choices of backsets
2-3/8" (60mm) and 2-3/4" (70mm). Change the backset for the latch
according to the illustration.
1
Publicidad
