Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications and Functions
1. Power supply
4 AA, 1.5V Alkaline batteries
2. Low battery indication
2-1 During operation, if the LED on the battery cover flashes red and constant beeping
is heard for 10 seconds, it means that the battery is low. The batteries need to be
replaced immediately.
2-2 All settings will remain active and won't change or disappear even if the battery is
down.
2-3 When the batteries are fully drained, the system can still be locked or unlocked
manually with the key.
3. LED Indicator
3-1 LED flashes green once: successful operation
3-2 LED flashes green twice: successful programming
3-3 LED flashes red three times: operation error
3-4 LED flashes red 5 times: password operational error. The system will initiate the
protective mode and stop functioning.
3-5 LED flashes orange 3 times: system is restored to default settings.
3-6 LED flashes orange slowly: lockset is in programming mode
4. Audio indication
4-1 1 beep means the operation is normal.
4-2 2 long beeps mean the setting is correct.
4-3 3 short beeps mean operational error.
4-4 3 long beeps mean the default password has been restored.
4-5 5 short beeps mean password operational error. The system will initiate the
protective mode and stop functioning.
4-6 10 short beeps mean the battery is low.
5. Programming Code (PC)
5-1 The default programming code is "0000". It is recommended that the user change
the programming code during initial installation.
5-2 There is only one programming code and is used to set all functions.
5-3 The programming code cannot be used to unlock the door.
5-4 The programming code must be 4-10 digits in length.
5-5 The programming code can be changed anytime as needed.
8
Publicidad
