Publicidad
Idiomas disponibles
Idiomas disponibles
English
Note: the upper part of the dispensing head may be washed with water if it is then properly
dried - fig. 26.
Note: Do not try to clean the mechanism using hard and/or sharp objects, since doing so
would risk damaging the machine.
ROUTINE CLEANING
„ Clean the appliance cooling chamber on a regular basis using a damp cloth and mild
detergent - fig. 27.
Note: Do not fill the cooling chamber with water as this may result in permanent damage.
Never use aggressive agents such as vinegar, acids, solvents or petrol.
„ The upper part of the dispensing head must be removed. Wash the dispensing head with hot
water and a gentle detergent.
Note: Do not wash the upper part of the dispensing head in a dishwasher, as doing so could
damage it and eliminate its shine.
CHILDREN'S SAFETY
„ To prevent children from using it, the tap's handle may be removed.
„ To remove the handle, make sure it is in an upright position and pull it upwards - fig. 28.
LEGAL INFORMATION
„ These operating instructions contain the necessary information for the proper use and upkeep
of the appliance.
„ It is essential to read this information and comply with these instructions in order to use and
maintain the appliance in complete safety.
„ Please note, moreover, that the contents of these operating instructions do not form part of a
previous or already existing legal agreement or contract, hence they do not affect the terms
of the latter.
„ The manufacturer's obligations are based solely on the contract of sale, which also contains
complete and exclusive terms pertaining to the warranty service provided.
„ The warranty conditions as set forth in the contract are neither limited nor extended on the
basis of the explanations herein.
„ These operating instructions contain information protected by copyright.
„ They may not be photocopied or translated into another language without the manufacturer's
prior written consent.
Environment
Environment protection first!
Your appliance contains valuable materials which can be recovered
or recycled.
Leave it at a local civic waste collection point.
12
TROUBLESHOOTING
Problem
Possible causes
The appliance does not
The appliance is not
come on.
connected to the mains
power supply.
The upper part of the
The Beertender
dispensing head is not
tap has been activated
properly positioned.
by hand.
The Beertender
tap or tube is not
inserted correctly.
No beer is being
The Beertender
dispensed.
is empty.
There is no keg inside
the Beertender
appliance.
The Beertender
appliance tap handle is
not correctly installed/
positioned.
You cannot close
The upper part of the
the upper part of the
dispensing head was
dispensing head.
improperly positioned.
English
Remedies
Connect the appliance
to the power supply.
Keg
Put the Beertender
®
®
Keg tap back in its
original position.
Keg
Remove the
®
Beertender
Keg tap
®
from the appliance and
fit it again following
section: Using the
Beertender
.
®
Replace the
Keg
®
Beertender
Keg with a
®
new one.
Install a keg inside the
Beertender
appliance.
®
®
Install/position the
®
tap cover correctly.
Properly position
the upper part of the
dispensing head.
13
Publicidad
