Publicidad
Fonctionnalité de la
machine
Functions of the
machine
D
-14-
115100-Manual-A.indd 14
115100-Manual-A.indd 14
Stopping Sandblasting: While continuing to squeeze the trigger, turn the abrasive control valve to
the closed position.
Press and hold the trigger to expel any remaining abrasive material from the abrasive pipe. When
you notice that only air is coming out of the gun you can stop the flow by releasing the trigger.
This ensures complete purging of the hose and gun.
ALWAYS clean the gun thoroughly after use.
Once all the abrasive has been purged, you can close the air supply
Make sure the tap is turned on; point the gun in a safe direction.
Pull the trigger until the air stops flowing and the pressure gauge reads "0".
Disconnect the air supply hose from the supply valve.
Nettoyer soigneusement la machine et ses outils avant de la stocker.
Reinig de machine en het gereedschap grondig voordat u deze opbergt.
Limpie a fondo la máquina y sus herramientas antes de guardarla.
Limpe bem a máquina e suas ferramentas antes de guardá-la.
Pulire accuratamente la macchina e i suoi utensili prima di riporla.
Thoroughly clean the machine and its tools before storing it.
12/10/2023 15:23
12/10/2023 15:23
Publicidad
