Pride Mobility Pursuit 2 Manual De Usuario página 13

NOTE: If you are preparing your scooter for transport
or service, or if there is a situation that requires you to
manually shut down the electrical system, press the manual
shut-off button on the circuit breaker. This will cut all power
to your scooter.
SECUREMENT POINTS
Always secure the scooter in a forward-facing position in
the vehicle. Attach the four tie-down straps to the designated
securement points. See fi gures 6 and 7. Tighten the straps
to suffi ciently remove all slack. Never attach tie-downs to
adjustable, moving, or removable parts of the scooter such
as armrests, shrouds, and wheels. These items should be
removed. Position the anchor points for the rear tie-down
straps directly behind the rear securement points on the
scooter. The front tie-down straps should anchor to fl oor
points that are spaced wider than the scooter to provide
increased lateral stability.
WARNING! Ensure scooters are properly
secured to the motor vehicle during transport.
Scooters that are not properly secured can
become a hazard to the user and to other
vehicle passengers in the event of a crash,
sudden stopping, or swerving, as the scooter
could tip or slide out of place.
SC7132
I I . Y O U R S C O O T E R
or
Figure 6. Rear Securement Points (Identified
with black dots)
or
Figure 7. Front Securement Points (Identified
with black dots)
13