Pride Mobility Pursuit 2 Manual De Usuario página 15

I I I . B AT T E R I E S A N D C H A R G I N G
WARNING! Do not attempt to open the battery charger case. If the battery charger does not
appear to be working correctly, contact your authorized Provider.
WARNING! If the battery charger is equipped with cooling slots, then do not attempt to insert
objects through these slots.
WARNING! Be aware that the battery charger case may become hot during charging. Avoid skin
contact and do no place on surfaces that may be affected by heat.
WARNING! If your battery charger has not been tested and approved for outdoor use, then do
not expose it to adverse or extreme weather conditions. If the battery charger is exposed to
adverse or extreme weather conditions, then it must be allowed to adjust to the difference in
environmental conditions before use indoors. Refer to the manual supplied with the battery
charger for more information.
Follow these easy steps to charge the batteries:
1
4
1 2
Figure 9. Battery Charging Procedures Diagram
WARNING! The LED lights on the charger indicate different charger conditions at various times.
If the LED does not indicate that charging is complete within 24 hours, unplug the charger
from the outlet and contact your Provider. Refer to the operating instructions supplied with the
charger for a complete explanation of these indicators.
NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery condition
meter will not operate while the batteries are charging.
SC7132
2
5
8-14H
3
6
15