INSTALLATION INSTRUCTIONS
4. Test the operation of the pump by pouring water
into the sump basin.
5. If the lower rod stop is positioned 8 in. from
the top of the rod, the pump will turn on
at approximately 10 in. to 12 in. and off at
approximately 2-1/2 in.
CARE AND MAINTENANCE
WARNING: Always disconnect pump from power
source before handling.
At least every three months:
Remove any debris that may build up in the
sump basin to prevent it from interfering with the
operation of the float switch.
Test system for operation.
8
© 2023. All rights reserved.
4
5
Top Float Rod Stop
Lower Float Rod Stop
Float Rod Guide
1
IL2045
Remove
debris