20. Remove the small squares and drill
holes with ø 2 mm at 8 mm from the
outer edge of the door.
21. Place the small square on the guide
again and fix it with the screws
supplied.
22. Align the kitchen furniture door and
the appliance door by adjusting the
part (Hb).
9. NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
OK
8 mm
Ha
Hb
Hb
23. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
• All screws are tightened.
• The sealing strip is attached tightly to
the cabinet.
• The door opens and closes correctly.
HISSS!
ENGLISH
17
BRRR
!