Philips Satinelle Soft HP6408 Manual De Instrucciones página 11

cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
- Never rinse the appliance or the adapter under the tap (Fig. 12).
- Keep the appliance and the adapter dry (Fig. 13).
cleaning the attachments
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 1).
 Remove the attachment (efficiency cap or massage attachment)
from the epilating head (Fig. 15).
 Remove loose hairs with the cleaning brush.
5 Rinse the attachment under the tap while turning it.
6 Dry the attachment before you use or store it.
cleaning the epilating head
1 Switch off the appliance.
 Remove the adapter from the wall socket (1) and pull the appliance
plug out of the appliance () (Fig. 1).
 Push the epilating head in the direction of the arrow (1) and
remove it from the appliance () (Fig. 16).
 Remove loose hairs with the cleaning brush (Fig. 1).
5 Rinse the epilating head under the tap for 5-10 seconds while
turning it (Fig. 18).
6 Shake the epilating head firmly and dry it thoroughly with a tea
towel (Fig. 19).
Note: Make sure the epilating head is completely dry before you place it
back onto the appliance.
EnglisH
11