Pahlen LED 170AP Manual Del Usuario página 9

LED Lighting Element 170AP
Exploded View - LED Lighting Element
513-0219
This is the way you install the cable to
the LED module:
1
1. Loosen screws in socket (B) so that the holes for cables opens leaving space enough for actions with cable guides.
2. Pull seal (C) onto the cable (E). Pull cable guide through the socket.
3. Make sure the cable cover goes right under the socket.
If the cable is not dragged sufficiently far, there is a risk that the silicone seal will not function properly. Water may then leak into the lamp.
Surface treatment
E
The tolerance class in accordance with this
4
part of ISO 2768-1
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
4. Tighten screws. Make sure the screws are firmly seated.
5. Cut or cut off the piece of the guide that sticks through the socket.
6. Align the socket into the LED module (A). Make sure the seal is properly sealed. Tighten the nut (D).
Replacement lamps:
1. The power must be off.
2. Loosen existing front and lighting insert. Lift the lighting insert above the water surface.
3. Disconnect the old lamp from the lighting insert, disconnect the cable.
4. Install the new lamp, see "Installation".
3
2
1
513-0219
2
Assembly drawing no.
Belysn.insats LED AP170
Typ 300
Adagio Pro
403-0242-171220
1,5m
4m
7
6
5
14
13 513-0219
3
B
A
C
3
Designed by: Drawn by: Date Approved by:
PD 2018-08-01
Art.no. 1553004X
5
Scale Revised by: Date
ASA
Drawing number
M12923 1
403-0242-171220
9
513-0219
1. Mounting frame ring
513-0219
2. U-stripe
12
513-0219 3. Lamp
4 Art.nr Pos 3
4. Cable
Belysningsinsats LED-lampa
15530047 15530271
15530048 15530272
5. Connector/Socket
15530049 15530273
6. Silicone gasket
7. Nut
8. Bracket
14 3 Flänsmutter M6MF M5 Rostfritt A4
13 3 Fästvinkel LED lampa Rostfritt A4
9. Plastic foot
12 1 Tätningshylsa Di10 Dy14 Rubber
7 1 Mutter
10. Screw for the foot
6 1 Packning Silicon (orange) Silicon
5 1 Kontaktdon (LED/kabel)
4 1 Kabel H07RN8-F L=4m (2x1.5mm²) 11. Screw
3 1 LED AP170 Generic
2 1 U-list PVC GV-1-5, L=550mm PVC
12. Spacer
1 1 Fästram special 170/300 lampa
Item. Qty. Title/ Name
13. Bracket
Surface treatment
E
The tolerance class in accordance with this Assembly drawing no.
14. Flange nut
part of ISO 2768-1
Belysn.insats LED AP170
Adagio Pro
Box 728, SE-194 27 Upplands Väsby, Sweden
Phone +46 8 59411050, Fax +46 8 59086880
A LED-module
B Connector/Socket
C Silicone gasket
D Nut
E Cable
D
E
6
Rev.no.
403-0242-171220
ENGLISH
Anm
vit (WW)
vit (CW)
RGB
19930024 ISO 6923 M5 A4
15001006 M13134
15530265 M13035
15530257 510-0075-150622
15530254 510-0087-151118 orange
15530255 Kontakt
15530258 15530258
se tabell PLP170 (17-11-15)
12272 U-list
15530029 M13133
Material Art_nr Drawing.no:
Designed by: Drawn by: Date Approved by:
PD 2018-08-01
Art.no. 1553004X
Scale Revised by: Date
ASA 2022-02-17
Drawing number Rev.no.
M12923 3
403-0242-171220
403-0242-171220
403-0242-171220