MAHLE BatteryPRO E-HEALTH Charge 20 Manual De Usuario página 98

98
BatteryPRO | E-HEALTH Charge 20
Multi language digital user manual
10. Maintenance
10.1
Before maintenance
To meet NFPA-70E, OSHA 1910.333 and other
Health/safety/security codes, please adhere to
the notice and get the permit needed in advance
as below:
1. Turn off power (Work de-energized when-
ever possible)
2. Lockout/Tagout (LOTO)
3. Live work permit (Input terminals with HV
after door open)
4. Plan the work/Permit to work
5. Use Personal Protective Equipment (PPE)
6. Safe workplace condition & space
Maintenance check list
Please refer to Appendix for more details.
10.2
General maintenance
The DC Fast Charger is cooled by forced
n
air. Please keep charger in a ventilated lo-
cation and do not block the air vents of the
DC Fast Charger
Please clean or replace the air filters regu-
n
larly to ensure the DC Fast Charger works
properly
The housing was made of welding pro-
n
cess and surface painting. It is necessary
to keep the exterior clean all the time. It's
easy to get rusty if not keeping the exterior
clean especially in corrosion sensitive envi-
ronment. Slightly rusty will not affect char-
ger performance, but if charger is serious
rusty during or exceed the warranty period,
please contact local vendor for instruction
Clean the DC fast Charger at least three
n
times a year, keep the exterior clean at all
times
Clean the outside of the cabinet with
n
damp cloth or wet cotton towel, only
use low-pressure tap water and cleaning
agents with PH level between 6 to 8
Do not apply high-pressure water jets
n
Do not use cleaning agents with abrasive
n
components and do not use abrasive tools.