Descargar Imprimir esta página

Parkside PPBSA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 24

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 141
GB
MT
Operation .......................... -20­-­50 °C
Storage .................................0­-­45 °C
Sound pressure level
(L
) ....................... 85.1 dB, K
pA
Sound power level
(L
) ..................... 96.1 dB; K
WA
Vibration (a
)
h
Handle ..........2.699 m/s
Auxiliary handle .. 1.937 m/s
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
Operating frequency/
Frequency band .....2400­-­2483.5 MHz
Max. transmission power ....... ≤­20­dBm
The­specified­total­vibration­value­and­the­
stated noise emission value have been
measured according to a standardised test
method and can be used to compare one
power tool with another.
The­specified­total­vibration­value­and­the­
stated­specified­noise­emission­value­can­
also be used for a provisional assessment of
the load.
Wear ear protection.
Warning: The vibration and noise
emissions may deviate from the spe-
cified­values­during­actual­use­of­the­pow-
er tool, depending on how the power tool
is being used and, in particular, what kind
of material is being worked on.
Safety measures for the protection of the
operator are to be determined that are ba-
sed on an estimate of the actual vibration
load under the real operating conditions
(for this, all parts of the operating cycle
are to be taken into account, for example,
times in which the power tool is turned off,
and those during which it is turned on but
running without a load).
24
Charging time
The device is part of the (Parkside) X 20
V­TEAM­series­and­can­be­operated­with­
= 5 dB
pA
batteries­of­the­(Parkside)­X­20­V­TEAM­
= 5 dB
series.
WA
Batteries­of­the­(Parkside)­X­20­V­TEAM­
2
; K= 1.5 m/s
2
series may only be charged using chargers
of­the­(Parkside)­X­20­V­TEAM­series.
; K= 1.5 m/s
2
2
We recommend that you operate this appli-
ance with the following batteries only:
PAP 20 B1,­PAP 20 B3,­
Smart PAPS 204 A1,­Smart PAPS 208 A1
We recommend charging these batteries
with the following chargers:
PLG 20 A3,­PLG­20­A4,­PLG 20 C1,­
PLG 20 C3,­PDSLG 20 A1,­
Smart PLGS 2012 A1
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku

Publicidad

loading