26
USING YOUR WASHING MACHINE
Adjusting the melody and button tones,
Signal
The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. The melody and
button tones can be changed or they can be
turned off if desired.
1 Press ©.
2 Turn © to the desired cycle.
3 Press E)
Adjust the melody and button
tones as desired.
4 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
5 Press (O)
Prewashing, Pre Wash
Pre-wash for 16 minutes when clothes are cov-
ered in dirt or dust. This feature is suitable for
heavily soiled items.
1 Press ©) and turn © to select the desired
cycle.
2 Press|
==).
= E=] light will turn on.
3 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
4 Press 6.
Rinse, drain and spin only, Rinse+Spin
Use this cycle to rinse detergent from the load.
1 Press (©) and turn © to select the desired
cycle.
2 Press `
3 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
4 Pulse 6.
Adding extra rinse cycle, Extra Rinse
You can add an extra rinse cycle to the default
rinse cycle.
1 Press ©) and turn © to select the desired
cycle.
2 Press |" emme |.
- [Fee
light will turn on.
3 You can now modify other cycle settings and
add options (see page 25-28), or proceed to
step 4 to begin the cycle.
4 Press 0,
Presetting the start time, Delay Wash
You can set the desired start time.
1 Press ©) and turn
to the desired cycle.
2 You can now modify other cycle settings and
add options (see page 25-28).
3 Pres:
start tir
= [ame | light will turn on.
- The set start time appears on the display
panel.
- Each press of the button increases the delay
time by one hour, up to 19 hours.
4 Press (M).
» | repeatedly to select the desired
High temperature, Steam
Adding the Steam option to these cycles helps to
enhance washing performance.
By using hot steam fabrics get the cleaning ben-
efits of a super hot wash.
1 Press (o) and turn © to select the desired
cycle.
2 Press | % |, The washer will automatically
adjust the cycle settings.
3 Set any other desired options.
4 Press (M).
A WARNING
+ Do not touch the door during steam cycles.
The door surface can become very hot. Allow
the door lock to release before opening the
door.
* Do not attempt to override the door lock
mechanism or reach into the washer during
a steam cycle. Steam can cause severe
burns.