Publicidad
EX100_978030-01.qxp_Innenseiten_EX100 14.08.23 11:57 Seite 10
Important safety instructions
GB
These operating instructions familiarise
you with important safety instructions
and information required to operate the
device properly!
Please read the instructions carefully,
keep them in a safe place and pass them
on to the next owner with the device,
if necessary!
All safety instructions serve for your per-
sonal protection as well!
This device is in compliance with the gener-
l
ally accepted technical rules and the relevant
safety regulations.
This device is not intended for use by
l
persons (including children) with limited
physical, sensory or mental abilities, or who
lack experience and/or know-how, unless
they are under supervision of a person re-
sponsible for their safety, or have received
according instruction by that person on how
to operate the device.
Use device as intended!
l
Prevent sprayed droplets from drifting onto
l
areas that are not to be treated. If working
outdoors, do not spray into the wind.
Check the functioning of the spray unit each
l
time before startup, paying special attention
to the hose connection and the screw con-
nectors. Check material for cracks, brittleness
and corrosion.
Do not expose the filled tank to strong sun-
l
shine for any long period of time.
Operating temperatures must not exceed
+ 40 °C. Protect unit against frost.
Clean tank thoroughly immediately after
l
use and then dry completely.
Spraying agents that are environmen-
l
tally harmful should be use up as far as
possible on the object of the spraying,
any unavoidable residues should be put
in a suitable holding container and sent
for special disposal.
Observe all laws and regulations con-
cerning materials hazardous to waters
when temporarily storing and dispos-
ing of such materials.
Keep away spraying devices and agents
l
from children, animals and waters.
Do not try to clear blocked nozzles by blow-
l
ing them out with your mouth.
The unit is not intended to store liquids, it
l
must be emptied out after each time it has
been used and washed out thoroughly.
Do not exceed the permissible overpressure
l
of 3 bar when pumping.
All parts that are under pressure or conduct
l
the liquid or operating parts and the the
safety / pressure relief valve must be checked
regularly to ensure that they are in perfect
condition and function properly. Stop using
the unit at once if any damage is suspected.
Do not allow it to remain pressurised for an
l
extended period.
As a precautionary measure, we recommend
l
that the pump spray unit be subjected to a
particularly thorough inspection every two
years, preferably by the manufacturer. Re-
pairs to the tank are not permitted.
Observe the accident prevention regula-
l
tion "DGUV Regeln 100-500; Betreiben von
Arbeitsmitteln [DG-UV Rule 100-600; op-
erating work equipment]".
Repairs to the equipment should only
l
be carried out by GLORIA Service Sta-
tions. Order spare parts from your au-
thorised dealer. If the required parts
10
Publicidad
