Dometic BUTTNER TEMPRA TLB100 Instrucciones De Montaje Y De Uso página 12

EN

1. Ensure that the DIP switch 6 (1) is set to the on position (factory setting).
If other devices are connected to the battery via the BUS (4), ensure that DIP switch 5 is set to the on position
(factory setting).
2. Press and hold the On/Off switch (2) for 1 s.
The battery is active when the LED (3) lights up.
Shutting down
The battery can be switched off in four different ways:
• With the display button
• With the On/Off switch
• With the DIP switch 6
• With the smartphone application
12