Descargar Imprimir esta página

Levenhuk Wezzer PRO LP300 Guia Del Usuario página 9

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
Reset button and transmitter LED
If the multisensor is not transmitting data, perform a reset. Press and hold RESET for 3 seconds until the
LED (11) lights up. Once the LED lights up, release the button. The LED should resume its normal operation,
flashing every 48 seconds.
Recommendations for improving wireless
connectivity
To avoid radio frequency interference, we recommend that you adhere to the following conditions.
• Place the console several meters away from computer monitors and TVs.
• If you have devices on the 433MHz frequency and are experiencing intermittent connectivity, please unplug
them to troubleshoot.
• The maximum range of the device is 100m without, and 30m with obstacles.
• The radio signal does not pass through metal. With metal siding, place the sensor and console so that there
is a window between them.
Table of materials and their effect on radio signal transmission loss
Glass (untreated)
Base station
ATTENTION! The weather station functions are activated by tapping areas of the tap screen
(not pressing!). Each tap of the sensor is accompanied by a sound and a brief switching on of the
backlight. After 30 seconds of inactivity, it automatically returns to normal display mode.
The TENDENCY (Weather forecast) screen area contains the +, ON/OFF, and − tap buttons. If the buttons are
flashing, it means that they are active. The + and − buttons are used to change the values of the selected
parameter. The ON/OFF button is used to turn functions on or off. If you press and hold the + and − buttons for
3 seconds, it will enable you to quickly adjust the value of the selected parameter.
Open the battery compartment on the back of the console and insert 3 AA batteries into the display console,
while ensuring the correct polarity.
To establish a connection with the multisensor, place the console at a distance of 1.5m to 3m and wait a few
minutes for synchronization.
Material
Plastic
Wood
Brick
Concrete
Metal
10
11
Radio signal transmission loss
9
5−15%
10−15%
10−40%
10−40%
40−80%
90−100%

Publicidad

loading

Este manual también es adecuado para:

82933