Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION
INSTALLATION
• Place the air conditioning on a solid and stable floor, this way
you will prevent excessive noise and vibrations. Make sure
that the floor is strong enough to support the weight of the
appliance.
• The appliance has small wheels for easy moving. Make sure only
to move the air conditioning over a flat and level surface. Be
careful when moving the air conditioning over carpet. Never roll
the unit over an object.
• The plug must be plugged into an appropriate outlet that is
installed and grounded in accordance with all local standards
and requirements.
• Mount the cable storage accessory on the back of the unit.
• Never place any object within 30 cm round the air conditioning.
• Make sure that the air outlet is brought out with the hose. Keep the opening to the outside as
small as possible so that no warm air from the outside can come back inside.
• Make sure there is a free surrounding of at least 50 cm around the outlet.
• Make sure the air outlet hose is not bent during use.
INSTALLATION OF THE WINDOW KIT
The air outlet hose must be used in the "cool" or "auto" mode. During the "fan" or "dry" mode, you
don't need to attach the air outlet hose.
1. Place the hose/appliance connector on one side of the
air outlet hose and the hose/window adapter connector
on the other side of the hose. The connectors snap into
place as soon as you push them onto the hose.
www.domo-elektro.be
1
73
Publicidad
