Publicidad
Idiomas disponibles
Idiomas disponibles
2. Attach the hose to the unit. The side of the hose with
hose/appliance connector must be mounted on the air
outlet at the back of the appliance. Slide the connector
into the air outlet holders. Make sure that the hook on
the connector matches the notch above the air outlet.
3. Place the window adapter in the window. This can be
done both horizontally and vertically. Use the window
seals to close any openings in the window. Block the
window adapter at the desired length using the supplied
window adapter plug.
4. If desired, you can fix the window with the L-iron and 2
screws.
5. Attach the connector to the window adapter.
INSTALLATION WALL KIT
The air outlet hose must be used in the "cool" or "auto" mode. During the "fan" or "dry" mode, you
don't need to attach the air outlet hose.
1. Make an opening in the wall the size of the wall adapter
(Ø 125 mm) at min. 30 cm and max. 120 cm from the
floor. Insert the wall adapter into the opening and attach
it to the wall using the 4 supplied plugs and screws.
74
www.domo-elektro.be
2
3
4
5
1
max 120cm
min 30cm
Publicidad
