Jimmy PW11 Pro Max Manual De Instrucciones página 11

Hot drying function
Under charging mode, press mode button to enter hot dry
mode. Hot air will dry entire air path including burshroll,
dust cup and dirty water tank for about 0.5 hour and then
only dry brushroll for another 2.5 hours. In the first 0.5
hour full air path drying, vacuum motor will work to send
hot air through the full air path.
To stop drying air path and only keep brushroll drying for
silent drying mode, press on/off button, vacuum motor will
not work in this mode.
To turn on and turn off hot air drying function, press mode
button.
Note: This function is to prevent humid brushroll to breed
bacteria or reduce odor.
Brushroll and air path self cleaning
function
Under charging mode, press self cleaning button to
enter self cleaning mode (Fig 15). After self cleaning,
product automatically enters brushroll hot drying mode.
During self cleaning, if need to complete self cleaning in
advance, press on/off button or mode button. And product
will go back to charging mode and fan will turn off after 3
minutes.(Fig 16)
Note:
1.Before start self cleaning, please drain the dirty water tank and make sure product is placed on charging
base, power cord is connected to power socket and charging base, and there is at least 50% water in clean
water tank. After self cleaning, please clean dirty water tank again.
2.When the power is lower than 10%, the machine cannot enter the self cleaning mode or hot drying mode.
After charging for a period of time, it can work on self cleaning mode or hot drying mode.
Clean water tank empty indicator
1.During use of the stick vacuum and washer, if LED screen shows "
water, please fill water", please fill clean water into clean water tank and then continue to use directly.
2.During self cleaning, if there is no water inside clean water tank, the self washing automatically stop and the
voice reminds "No clean water, please fill water". Please fill clean water into clean water tank and then press
self cleaning button again to restart self cleaning.
Fill up clean water tank
Fill up clean water tank: After removing the clean water tank, open the water filling plug, flip it upward to
expose the water inlet hole, pour clean water and cleaning solution in, and then plug back to the original
position and reinstall the clean water tank to floorhead. (Fig 17)
Note: When adding clean water, you can add the JIMMY cleaning solution equipped with the product, the ratio
is about two bottle of cleaning solution to one full water tank, the water temperature cannot exceed 40°C.
Dirty water tank full indicator
1.When the stick vacuum and washer detects that the dirty water tank is full, the machine will stop working
and give a voice reminder. Please clean the full dirty water tank and put it back before use.
on/off
button
mode
button
15
Hot drying mode
16-1
Charging mode
16-3
" and the voice reminds "No clean
self-cleaning button
Self cleaning mode
16-2
Water
filing
plug
17
9