Jimmy PW11 Pro Max Manual De Instrucciones página 7

Packing list
Mainbody
Handheld
vacuum
assembly
1
Carpet brush Upholstery tool
1
Accessory holder
Metal tube
1
Product assembly and disassembly
Note: Cut off power before disassembling or assembling
the product.
Mainbody assembly and disassembly
When installing the mainbody, insert the end of the
mainbody into floorhead connector vertically until a
"click" sound is heard. Ensure that mainbody is tight and
not loose. To remove the main body, simply press the
floorhead release button and lift the main body upward.
(Fig 1)
Battery pack assembly and disassembly
1.Hold battery and slide down along the leading slot,
press down until a "click" sound is heard.
2.Press battery release button, pull battery pack upward
to take it out.(Fig 2)
Note: No need to take out battery unless it needs
replacement.
Handheld vacuum assembly and
disassembly
Insert the end of the handheld vacuum installed with
the battery pack into mainbody connector vertically
until a "click" sound is heard. Ensure that the handheld
vacuum is tight and not loose.
In this status, the product is used as a cordless vacuum
and washer. To remove the handheld vacuum cleaner
separately, simply press the handheld vacuum release
button and lift it up vertically. (Fig 3)
Dirty water tank assembly and disassembly
To assemble dirty water tank, locate dirty water tank bottom to mainbody tray slot and then push dirty water
tank towards mainbody until a "click" sound is heard. To take out dirty water tank, hold mainbody with one
hand and dirty water tank handle with another hand, press dirty water tank release button with thumb and pull
dirty water tank out. (Fig 4)
Floorhead
1 1
Crevice tool
1 1
Accessory holder
tube
1 1
Charging base
Battery pack
upper
1
Cleaning brush Cleaning solution
1
Instruction
Power cord
manual
1
Floorhead
release button
1
2
3
4
Charging base
lower
1 1
Electric mattress
head
1 1
1
Battery pack
release button
Handheld vacuum
release button
Drity water tank
release button
5