Jimmy PW11 Pro Max Manual De Instrucciones página 13

3. When using vacuum cleaner, the icon on LED sceen displays left working minutes. When battery power is
lower than 20%, the battery icon on right top corner turns from white to red.
Chapter 3 Cleaning and Maintenance
Dirty water tank cleaning
After turning off the vacuum cleaner, remove the dirty
water tank, lift the water tank top cover, and remove the
filter frame from it, open the flip cover of the filter frame,
take out the filter. Pour out dirty water and dirt in the water
tank, then wash dirty water tank, water tank cover, filter
frame and filter. If there is foreign matter in the dirty water
tank pipe, it can be cleaned with cleaning brush; dry the
above parts after washing. And then reassemble all the
parts back into dirty water tank. Put dirty water tank back
into mainbody to continue working. (Fig 19)
Note:
1. After using stick vacuum cleaner, it is recommended to
clean the dirty tank immediately;
2. When reinstalling the garbage basket,do not fold the
black soft rubber under the filter.
Floorhead cleaning
After removing the clean water tank, brushroll, and dirty
water tank, insert the cleaning brush through the circular
hole below the installation position of the mainbody to clear
foreign matter and scales in the pipe, and the clogged hair;
Use the blade on the mini brush to cut off the entangled hair
on the brushroll; Wipe the dirty parts of the machine and
then assemble them back into machine (the brushroll can be
placed in the brushroll housing for drying). Wash clean the
cleaning brush and then put it back into brushroll housing.
(Fig 20)
Note: Do not wash the floorhead with water!
Dust cup cleaning
Press the dust cup release button to remove the dust cup from the handheld vacuum cleaner. Lift the metal
handle on cyclone to pull out cyclone assembly and empty dust cup. Hold metal handle and rotate to remove
HEPA. (Fig 21)
Maintenance and Storage
1. it is recommended to clean the dirty water tank, dust cup, brushroll after each use. If there is any of below
situation:
1) HEPA filter leaks dust.
2) Foam filter severely damaged.
3) The brushroll has serious hair loss,or has strong vibration and abnormal noise during use.
2. It is recommended to purchase consumables and replace it to avoid machine performance.
3. when the machine is long idled, place it in a cool and dry place, avoid direct sunlight or wet environment.
When pack and store the machine, please be sure to clean the machine and dry all parts to prevent damage
to the machine.
Dirty water tank
cleaning
19
20
Dust cup release button
21
11