OHAUS Frontier FC5513R Manual De Instrucciones página 25

EN-20
TM
Frontier Centrifuge FC5513&FC5513R
The list of the last 99 error messages can be looked over by pressing the key "RPM/RCF" (5) and scroll through it by
the adjusting dial (4). The respective error codes appear in the display "RPM/RCF" (A-1). Please refer to "Table 6:
error messages" (See APPENDIX).
To change back to normal program mode again, switch off the centrifuge for a short period.
A-2
A-1
4
5
6
Figure. 33