Atlantic 507515 Manual Del Usuario página 30

Put the device on stand-by,
hold the stand-by button (A)
pressed for some time.
To have access to the time and
the day, press several times on
the Menu (B) button until the
spanner is selected
To modify the time, press on
or (D), the times flash. Press
again on or (D) to change
the time.
After setting the times, you
can have access to setting the
minutes by pressing on
(D)
After setting the hours /minutes,
you can have access to the
setting of the day by pressing on
(C).
To change the day, press on
or (D), the day flashes. Press
again on or (D) to change
the day.
PUTTING THE DEVICE ON STAND-BY
SET THE TIME AND THE DAY
MENU
or
OFF
The screen goes out.
The letters on the screen are
displayed: you can start setting
the time.
After 5s of non-activity, the time is
set automatically and the minutes
flash.
After 5s of non-activity, the minutes
are automatically validated.
The letters on the screen are
displayed, you can start setting
the day.
After 5s of non-activity the day is
automatically validated.
29